Made in the USA

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Single Plunger Push Button Switches > Push Button Switches with Larger Mounting Pattern > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Push Button Switches with Larger Mounting Pattern

Check up to five results to perform an action.

The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plunger head is powder painted or chrome plated die-cast zinc. The plunger head of the 04662 is plastic. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations. These switches can be found on a variety of machines such as punch presses, press brakes, and spot-welding equipment as “RUN”, “START” or “STOP” buttons. They are also used on transfer machines. The 04662-002 complies with standards for ‘emergency stop’ applications. Their rugged construction and long term reliability make these switches extremely well suited to function within various industrial / commercial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

Plungers and contacts are not field replaceable.
Use legend plates series 09005.
Must order #04917-212 or #04917-712 if ring guard is required.
Ring guard for these switches cannot be added in the field.

Can be mounted in REES 04938 series.

single plunger


These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.



Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

Compare Items Add To Cart Request Quote
  Results 1 - 6 of 6 1 

Item #

Item Photo

Plunger Color

Operating Force

Intergral Ring Guard

Positive Opening Contact

Contact Arrangements (All Momentary)

04662-002 2.25" dia. Red Plastic 5.0 lb No #09 NO + NC
Positive Break,
04917-102 2.75" dia. Red Painted Die Cast 3.5 lb No #64 2 NO + 2 NC,
04917-112 2.75" dia. Chrome Plated Die Cast 3.5 lb No #64 2 NO + 2 NC,
04917-212 2.75" dia. Chrome Plated Die Cast 3.5 lb Yes #64 2 NO + 2 NC,
04917-712 2.75" dia. Chrome Plated Die Cast 2.0 lb Yes #64 2 NO + 2 NC,
04917-812 2.75" dia. Chrome Plated Die Cast 2.0 lb No #64 2 NO + 2 NC,
  Results 1 - 6 of 6 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80