Call: 260.495.9811Email: sales@reesinc.com
TERMS AND CONDITIONS

NOTE: Express orders - if need shipped out today, order must be placed by the following times:

UPS: 11:00 A.M. Eastern Time
FedEx: 11:00 A.M. Eastern Time
*Express shipping may not be available for all items

Features/Applications
Features/Applications These contact blocks are designed for use on ALL REES push button operators and selector switches as shown on the preceding pages. The mechanical life of these devices is 1,000,000 operations. Each captive terminal on the contact block will accept (2) # 14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing.
The 52702 block consists of a B block (50702) attached to an adapter. This adapter Opens the NC contact of the B block Upon Removal from the switch operator. The OUR action provides an added level of security for instances where a NC block may be removed from the operator.

Electrical Ratings
“HEAVY DUTY - A600 / N150”
Listed under UL 508 - File # E 58589;
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN: 60947-5-1
Third party certified under Test Report - E58589 - D2 - CB 

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

CAUTION:  NEVER EXCEED THREE TIERS IN STACKING BLOCKS.

WARNING - DANGER

 

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

 

---------------------------------------------------------------------------------------------------------------------

 

AVERTISSMENT - DANGER

 

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

 

 

 

1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Item Photo

Contact Designation

Circuits

Normal Function

Stroke

Block Height

Add To Cart/Request Quote

50701-000
N/A A N/A 1 N/A Open N/A 0.20 in. to Close N/A 0.95 Add To Cart
Request Quote

50702-000
N/A B N/A 1 N/A Closed N/A 0.10 in. to Open N/A 0.95 Add To Cart
Request Quote

50703-000
N/A C N/A 2 N/A Open and Closed N/A 0.10 in. to Open 0.20 in. to Close N/A 1.18 Add To Cart
Request Quote

50716-000
N/A P N/A 1 N/A Closed
Do not stack this block
N/A 0.24 in. to Open N/A 0.95 Add To Cart
Request Quote

N/A W N/A 1 N/A Open N/A 0.14 in. to Close N/A 1.18 Add To Cart
Request Quote

50724-000
N/A X N/A 1 N/A Open N/A 0.08 in. to Close N/A 1.18 Add To Cart
Request Quote

N/A Z N/A 1 N/A Open N/A 0.06 in. to Close N/A 1.18 Add To Cart
Request Quote

51703-000
N/A C N/A 2 N/A Open and Closed
Make before Break
N/A 0.06 in. to Close 0.10 in. to Open N/A 1.18 Add To Cart
Request Quote

52702-000
N/A B OUR N/A 1 N/A Closed
Opens upon Removal
N/A 0.10 in. to Open N/A 1.70 Add To Cart
Request Quote
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 
^