Call: 260.495.9811Email: sales@reesinc.com
Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plastic plunger heads are solid colors throughout. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations. These switches can be found on a variety of machines in all types of applications. Their rugged construction and long term reliability make these switches extremely well suited to function within various industrial or commercial environments.
1.75 inch Plastic Mushroom Plunger PUSH-PULL
Push “OFF” (Contacts are both open) Pull “ON” (Contacts are both closed)

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO - See individual parts for Certificate # 

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

single plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Item Photo

Plunger Color

Operating Force

Positive Opening Contact

Contact Arrangement

Add To Cart/Request Quote
04596-001
N/A Black N/A 10.0 lb
 
N/A #07 NC + NC,
Pull to Make,
Slow-Make/Slow-Break
Add To Cart
Request Quote
04596-002
04596-002
N/A Red N/A 10.0 lb
 
N/A #07 NC + NC,
Pull to Make,
Slow-Make/Slow-Break
Add To Cart
Request Quote
04596-232
N/A Red N/A 6.0 lb
 
N/A #69 2 NO + 2 NC,
Pull to Make,
Make-Before-Break
Add To Cart
Request Quote
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 
^