Search:GO
USA
Made in the USA

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Double Plunger Push Button Switches > 1.00 inch and 1.75 inch Double Plastic Plunger > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

1.00 inch and 1.75 inch Double Plastic Plunger

Check up to five results to perform an action.

Features/Applications
The following NEMA 12/13, IP65 switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and long term reliability of these switches makes them extremely well suited to function within various industrial / commercial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.

double plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.





Compare Items Add To Cart Request Quote
   
  Results 1 - 10 of 10 1 

Item #

Item Photo

1.00" Plunger Color

1.75" Plunger Color

Contact Arrangement

Operation

01619-014 Black Yellow #02 NO + NC
Positive Break,
Slow-Make/Slow-Break
Momentary
01619-032 Green Red #02 NO + NC
Positive Break,
Slow-Make/Slow-Break
Momentary
01896-032 Red Green #04 NO + NC
Positive Break,
Slow-Make/Slow-Break
Maintained
01968-032 Green Red #68 2 NO + 2 NC
Positive Break,
Slow-Make/Slow-Break
Maintained
01968-132 Green Red #29 NO + NC
Positive Break,
Make-Before-Break,
Slow-Make/Slow-Break
Maintained
01968-232 N/A Green Red #68 2 NO + 2 NC
Positive Break,
Slow-Make/Slow-Break
Maintained
03605-032 Green Red #29 NO + NO + NC
Positive Break,
Slow-Make/Slow-Break
NO - Momentary, NO + NC - Maintained
03605-132 Green Red #29 NO + NO + NC
Positive Break,
Slow-Make/Slow-Break,
Make-before-Break
NO - Momentary, NO + NC - Maintained
03605-232 Green Red #69 2 NO + 2 NC
Make-Before-Break, Slow-Make/Slow-Break
Maintained
04947-132 Green Red #64 2 NO + 2 NC,
Anti-Tease, Snap-Action
Maintained, Positive Transfer
  Results 1 - 10 of 10 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 years