Search:GO
USA
Made in the USA
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Cable/Rope Operated Switches > Rope Operated Switch (HEAVY DUTY - A600 / N300) > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Rope Operated Switch (HEAVY DUTY - A600 / N300)

 
Check up to five results to perform an action.

Features/Applications
These switches are a low force slack cable style with ‘Slow-Make’ - ‘Slow-Break’ and ‘Snap Action’ contacts. Only the 03275-000 is ‘Positive Break’ and can be recommended for use as an Emergency Stop switch. The switches are basically push button devices operated through a nickel plated operating lever attached to the cover. Care must be taken when choosing and installing the operating rope because the low operating forces can be easily overcome and the switches will not trip or reset properly. The open style switches must be secured to a suitable enclosure. A sealing gasket and four mounting screws are supplied with each switch. The 04956-300 is a complete assembly consisting of (1) 03275-500 switch and (1) 02765-000 sheet metal enclosure powder coated black. On all the switches, each captive terminal will accept (2) # 14 AWG stranded wires. The silver composite contacts are gold plated to eliminate high resistance tarnishing. The life of these switches is in excess of 1,000,000 mechanical operations. These low force switches can be used for door control, signal devices, automation systems and warning devices etc. The maximum recommended rope (not supplied) length is 33 feet with a maximum interval support of 10 feet when horizontal.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
- See individual parts for Certificate #

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.



Compare Items Add To Cart Request Quote
   
  Results 1 - 4 of 4 1 

Item #

Item Photo

Trip Force

Operating Force Between 10 ft. Supports

Operating Type

Contact Arrangement

03221-000 3 lb 0.4 lb Momentary Slow Make/Slow Break #10 2 NO N/A
03275-000 6 lb 0.7 lb Momentary Slow Make/Slow Break #9 NO + NC N/A
03275-500 5 lb 0.6 lb Momentary Snap Action #64 2 NO + 2 NC N/A
04956-300 5 lb 0.6 lb Momentary Snap Action #64 2 NO + 2 NC N/A
  Results 1 - 4 of 4 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 years