Cable/Rope Operated Switches On Rees, Inc.

PRODUCTSCable/Rope Operated
Switches Single Plunger Push
Button Switches Double Plunger Push
Button Switches Accessories and Associated
Control Switches 22.5 mm Control Units 30.5 mm Control Units Supplemental Industrial
Switches Explosion Proof Cable Operated Switches Contact Blocks F.A.Q.

Made in the USA

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Cable/Rope Operated Switches


	Cable/Rope Operated Switches

	Click on a category to drill down.


		Cable/Rope Operated Switches with Broken Cable Detection (9) Features/Applications The following switches are ”taut cable” style with positive break and positive transfer features which make them particularly competent for Emergency Stop applications as well as ordinary circuit control. They are only offered in manual reset configuration with 2 NO + 2 NC gold plated contacts. The housing is made from high quality die-cast aluminum and painted with a yellow dry powder paint. Set-up position is easily attained without removal of the cover. Cable is stretched tightly until shaft end is flush with indicator hub end. Switch will trip and latch if the cable breaks, comes loose or is pulled. Blue booted reset button is pushed to reset contacts back to their ...




		Inline Cable Switches The following switches are to be hung in line with the cable run and do not need to be mounted to any surface. There are many configurations of this style of switch available including both “slack” and “taut” cable styles. They are available with up to 2 NO contacts and 2 NC contacts and/or an LED pilot light. All versions of this switch will come pre-wired with a 5 or 8 pin M12 connector for easy installation. There are many configurations available for the 04963-XXX series switches. Please contact us for more information if you do not see a fit for your application. Search Inline Cable Switches - 1 Items




		Cable Operated Switches (17) Features/Applications The following switches are “slack cable” style with ‘Positive Break’ features. This makes the manual reset styles particularly competent for use in Emergency Stop applications as well as for ordinary circuit control. They are offered in manual and automatic reset configuration. The housing is made from high quality die-cast aluminum and painted with a dry powder paint. The white powder paint is TGIC polyester which has no residual heavy metals and contains no lead or reactive materials that may be considered not safe in food. The 4X indoor type has stainless steel cover screws and shaft. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to ... Search Cable Operated Switches - 17 Items




		Cable Operated Switches with Single Flag Indicators or Latch Plates (12) Features/Applications The following switches are a “slack cable” style with ‘Slow-Make’ and ‘Positive Break’ contacts.These switches can be used for Emergency Stop applications as well as for ordinary circuit control. The housing is made from high quality die-cast aluminum and painted with a yellow dry powder paint. The independently operating red indicating flag rotates 90 degrees when tripped. Manually returning the flag to its normal position resets the switch. Switch enclosures are provided with two 1/2" NPT conduit openings. The maximum recommended cable length is 200 feet with a maximum interval support of 10 feet. The mechanical life of these devices is 150,000 operations. Each captive ...




		Cable Operated Switches with Double Flag Indicator(s) or Latch Plates (9) Features/Applications The following switches are a “slack cable” style with ‘Slow-Make’ and ‘Positive Break’ contacts.These switches can be used for Emergency Stop applications as well as for ordinary circuit control. The housing is made from high quality die-cast aluminum and painted with a yellow dry powder paint. The independently operating red indicating flag rotates 90 degrees when tripped. Manually returning the flag to its normal position resets the switch. Switches with less than 6 terminals are provided with two 1/2" NPT conduit openings and switches with 6 or more terminals are provided with two 3/4" NPT conduit openings. The maximum recommended cable length is 200 feet on each end ...




		New Bi-Directional Cable Operated Switch Features/Applications The following “slack cable” style, bi-directional switch 2 NO and 2 NC contacts. The housing is made from high quality die-cast aluminum and powder coat painted yellow. The covers are made from aluminum and also powder coat painted yellow. ...




		Rope Operated Sequence Switches (5) Features/Applications These switches are “slack cable” style with ‘Slow-Make’ contacts. The switches are not ‘Positive Transfer’ and they do not latch in any position. They should NOT be used for any Emergency Stop applications. The action of these devices is that when the switch actuating arm is pulled by a cable the switch contacts will change state, that is, the NO will be closed and the NC will go open. When the force on the cable is removed from the actuator arm, spring pressure will return it to its normal position, while the contacts are held in position through a ratchet mechanism. The next time the cable is pulled, the action is repeated with the contacts returned to their original ...




		Rope Operated Switch ( A600 / N150) (6) Features/Applications These switches are a slack cable style with Slow-Make - Slow-Break contacts. The switches are not ‘Positive Break’ or ‘Positive Transfer.’ These devices should NOT be used for any Emergency Stop application. The function of these switches is such that a device that is listed as NO uses a NC contact Block which is held open by a spring in the switch body. Pulling of the ring eye collapses that spring, allowing the Contact Block to close and actuate the circuit it is connected to. Releasing of the rope then allows the spring to expand thereby opening the contacts. The reverse is true for a NC listed switch. The contact cavity of the switch has provision for the addition of one more ...




		Rope Operated Switch (HEAVY DUTY - A600 / N300) (4) Features/Applications These switches are a low force slack cable style with ‘Slow-Make’ - ‘Slow-Break’ and ‘Snap Action’ contacts. Only the 03275-000 is ‘Positive Break’ and can be recommended for use as an Emergency Stop switch. The switches are basically push button devices operated through a nickel plated operating lever attached to the cover. Care must be taken when choosing and installing the operating rope because the low operating forces can be easily overcome and the switches will not trip or reset properly. The open style switches must be secured to a suitable enclosure. A sealing gasket and four mounting screws are supplied with each switch. The 04956-300 is a complete ...




		Accessory Items for Cable/Rope Switches