Made in the USA

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Cable/Rope Operated Switches > Cable Operated Switches > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Cable Operated Switches

Check up to five results to perform an action.

The following switches are “slack cable” style with ‘Positive Break’ features. This makes the manual reset styles particularly competent for use in Emergency Stop applications as well as for ordinary circuit control. They are offered in manual and automatic reset configuration. The housing is made from high quality die-cast aluminum and painted with a dry powder paint. The white powder paint is TGIC polyester which has no residual heavy metals and contains no lead or reactive materials that may be considered not safe in food. The 4X indoor type has stainless steel cover screws and shaft. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Units with NO + NC contact arrangements are provided with two 1/2 NPT conduit openings. Units with 2 NO + 2 NC contact arrangements are provided with two 3/4" NPT openings. The maximum recommended cable length is 200 feet with a maximum interval support of 10 feet. The mechanical life of these devices is 150,000 operations. These switches can be found on automated transfer machines and on various conveyor installations. Their rugged construction and long term reliability make these cable switches extremely well suited to function within various industrial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01474-M1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
These switches come with a santoprene 101-80 cover gasket. 

Contact assemblies are not field replaceable

normal potential


These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.



Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

Search Items

Compare Items Add To Cart Request Quote
  Results 1 - 17 of 17 1 

Item #

Item Photo


Trip Force

Operating Force Between 10 ft. Supports

Reset Type

Contact Arrangement

04944-000 Black 15 lb 3 lb Manual NO + NC
04944-020 Red 15 lb 3 lb Manual NO + NC
04944-040 Yellow 15 lb 3 lb Manual NO + NC
04944-200 Black 15 lb 3.8 lb Manual 2 NO + 2 NC
04944-220 Red 15 lb 3.8 lb Manual 2 NO + 2 NC
04944-240 Yellow 15 lb 3.8 lb Manual 2 NO + 2 NC
04944-500 Black 10 lb 1.2 lb Manual NO + NC
04944-520 Red 10 lb 1.2 lb Manual NO + NC
04944-600 Black 10 lb 1.8 lb Manual 2 NO + 2 NC
04944-620 Red 10 lb 1.8 lb Manual 2 NO + 2 NC
04944-640 Yellow 10 lb 1.8 lb Manual 2 NO + 2 NC
04944-700 Yellow 40 lb 11.0 lb Automatic NO + NC
04944-800 Yellow 40 lb 15.0 lb Automatic 2 NO + 2 NC
04944-840 Yellow 28 lb 10.5 lb Automatic 2 NO + 2 NC
04944-900 White 15 lb 3 lb Manual NO + NC
04944-920 White 15 lb 3 lb Manual 2 NO + 2 NC
04944-950 White 40 lb 11.0 lb Automatic NO + NC
  Results 1 - 17 of 17 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80