Call: 260.495.9811Email: sales@reesinc.com
Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body is made from die-cast zinc. The plungers are also made from diecast zinc with the 1.00 in. diameter style having a colored plastic (poly-carbonate) insert. The mushroom style plastic plunger heads are solid colors throughout. Each operator will accept up to three tiers of two contact blocks for a total of six separate circuits. Each operator is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these units is 1,000,000 operations. These devices can be found on a variety of machinery, used to perform such operations as ‘start’, ‘stop’, ‘top stop’,‘inch’, ‘on’, ‘off’, ‘forward’, ‘reverse’ etc.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Item #

Item Photo

Plunger Color

Plunger Material

Plunger Size, Style

Operating Force

Operating Type

Add To Cart/Request Quote
40001-001
40001-001
N/A Black N/A Chrome w/ Plastic Insert N/A 1.00" Standard N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40001-002
N/A Red N/A Chrome w/ Plastic Insert N/A 1.00" Standard N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40001-003
40001-003
N/A Green N/A Chrome w/ Plastic Insert N/A 1.00" Standard N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40001-004
N/A Yellow N/A Chrome w/ Plastic Insert N/A 1.00" Standard N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40031-001
N/A Black N/A Chrome w/ Plastic Insert N/A 1.00" Half Shroud N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40031-002
40031-002
N/A Red N/A Chrome w/ Plastic Insert N/A 1.00" Half Shroud N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40041-001
40041-001
N/A Black N/A Solid Plastic (DuPont Derlin 100ST Acetal) N/A 2.00" Mushroom N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40041-002
40041-002
N/A Red N/A Solid Plastic (DuPont Derlin 100ST Acetal) N/A 2.00" Mushroom N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40041-003
40041-003
N/A Green N/A Solid Plastic (DuPont Derlin 100ST Acetal) N/A 2.00" Mushroom N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40041-004
40041-004
N/A Yellow N/A Solid Plastic (DuPont Derlin 100ST Acetal) N/A 2.00" Mushroom N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
40041-012
40041-012
N/A Chrome N/A Zinc Alloy N/A 2.00" Mushroom N/A 2.00 lb plus 0.75 lb per contact block N/A Momentary Add To Cart
Request Quote
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 
^