Search:GO
USA
Made in the USA

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > 30.5 mm Control Units > 30.5mm Mushroom and Rope Pull Operators > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

30.5mm Mushroom and Rope Pull Operators

Check up to five results to perform an action.

Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body is made from die-cast zinc. The zinc plated ring eye operator is also made from die-cast zinc. The mushroom ergonomic shaped plungers are molded from DuPont Delrin 100ST Acetal for improved impact resistance and are solid colors throughout. Each operator will accept up to three tiers of two contact blocks for a total of six separate blocks. Each operator is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these units is 1,000,000 operations. These devices can be found on a variety of machinery, used to perform such operations as ‘start’, ‘stop’, ‘top stop’, ‘inch’, ‘jog’, ‘on’, ‘off’, ‘forward’, ‘reverse’, etc.
The 40102 series satisfies the requirements of IEC 60947-5-5 - 3.9 direct opening action (positive opening action) (of a contact element;) when fitted with one or more of any of our normally closed contact blocks. This is commonly referred to as “Positive Break”, meaning the breaking of the normally closed contacts in not dependant upon springs.
Recommended cable length for the 40050 series is 33 feet.

Designated switches have been certified as Emergency Stop Pushbuttons and are listed under UL/NISD File E357870, Sec. 1. These switches were evaluated for NISD mounted in a UL type 12/13 enclosure.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.





Compare Items Add To Cart Request Quote
   
  Results 1 - 25 of 25 1 

Item #

Item Photo

Operator Color

Operator Material, Size, Style

Padlock Feature

Switch Type

Positive Opening Contact

Contact
Block(s)
Included

Features

40050-000 Zinc Zinc Alloy Ring Eye No Momentary None N/A
40050-200 Zinc Zinc Alloy Ring Eye No Momentary 50702-NC N/A
40050-500 Zinc Zinc Alloy Ring Eye No Maintained None N/A
40067-002 Red 2.00 in. Flat Aluminum locks when depressed N/A Maintained N/A 50701-NO # 5 key, removable locked or unlocked, required to reset.
40067-202 N/A Red 2.00 in. Flat Aluminum locks when depressed N/A Maintained N/A 50702-NC # 5 key, removable locked or unlocked, required to reset.
40102-002 Red 2.00 in. Plastic Mushroom Yes Momentary None N/A
40102-004 N/A Yellow 2.00 in. Plastic Mushroom Yes Momentary None N/A
40102-101 Black 2.00 in. Plastic Mushroom Yes Maintained 50703-NO/NC N/A
40102-102 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD
50703-NO/NC N/A
40102-104 Yellow 2.00 in. Plastic Mushroom Yes Maintained 50703-NO/NC N/A
40102-112 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD
50701 50702-NO/NC N/A
40102-114 Yellow 2.00 in. Plastic Mushroom Yes Maintained 50716 50723-NO/NC
Make before Break
N/A
40102-122 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD
(2) 50703
(2) NO/NC
N/A
40102-124 Yellow 2.00 in. Plastic Mushroom Yes Maintained (2) 50703
(2) NO/NC
N/A
40102-201 Black 2.00 in. Plastic Mushroom No Maintained 50716 50723-NO/NC
Make before Break
N/A
40102-202 Red 2.00 in. Plastic Mushroom No Maintained
UL/NISD
50716 50723-NO/NC
Make before Break
N/A
40102-203 N/A Green 2.00 in. Plastic Mushroom No Maintained 50716 50723-NO/NC
Make before Break
N/A
40102-212 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD
(2) 52702 + 50724
(2) NC / (1) NO
NC Opens upon Removal
N/A
40102-214 N/A Yellow 2.00 in. Plastic Mushroom Yes Maintained (2) 52702 + 50724
(2) NC / (1) NO
NC Opens upon Removal
N/A
40102-222 Red 2.00 in. Plastic Mushroom No Maintained
UL/NISD*
None N/A
40102-224 Yellow 2.00 in. Plastic Mushroom No Maintained None N/A
40102-311 N/A Black 2.00 in. Plastic Mushroom Yes Maintained (2) 52702 NC
NC Opens upon Removal
N/A
40102-312 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD
(2) 52702 NC
NC Opens upon Removal
N/A
40102-314 Yellow 2.00 in. Plastic Mushroom Yes Maintained (2) 52702 NC
NC Opens upon Removal
N/A
40102-502 Red 2.00 in. Plastic Mushroom Yes Maintained
UL/NISD*
None N/A
  Results 1 - 25 of 25 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 

years