Call: 260.495.9811Email: sales@reesinc.com
TERMS AND CONDITIONS

NOTE: Express orders - if need shipped out today, order must be placed by the following times:

UPS: 11:00 A.M. Eastern Time
FedEx: 11:00 A.M. Eastern Time
*Express shipping may not be available for all items
  • 1.00 inch Double Plastic Plunger 1

    Features/Applications
    The following NEMA 12/13, IP65 switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and long term reliability of these switches makes them extremely well suited to function within various industrial / commercial environments.

    Electrical Ratings
    "HEAVY DUTY - A600 / N300”
    Listed under UL 508 - File # E 58589
    Certified under CSA C22.2 - File # LR 3648
    CE Compliant IEC/EN 60947-5-1
     Certificate # D-01496-M1

    Environmental Temperature Range
    Operating: +32°F to +131°F (0°C to +55°C)
    Storage: -40°F to +185°F (-40°C to +85°C)
    Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


    Can be mounted in standard REES Standard enclosures.
    Plungers and contacts are not field replaceable.

    double plunger

    WARNING - DANGER

    These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

    ---------------------------------------------------------------------------------------------------------------------

    AVERTISSMENT - DANGER

    Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

  • 1.00 inch and 1.75 inch Double Plastic Plunger 1

    Features/Applications
    The following NEMA 12/13, IP65 switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and long term reliability of these switches makes them extremely well suited to function within various industrial / commercial environments.

    Electrical Ratings
    "HEAVY DUTY - A600 / N300”
    Listed under UL 508 - File # E 58589
    Certified under CSA C22.2 - File # LR 3648
    CE Compliant IEC/EN 60947-5-1
     Certificate # D-01496-M1

    Environmental Temperature Range
    Operating: +32°F to +131°F (0°C to +55°C)
    Storage: -40°F to +185°F (-40°C to +85°C)
    Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


    Can be mounted in standard REES Standard enclosures.
    Plungers and contacts are not field replaceable.

    double plunger

    WARNING - DANGER

    These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

    ---------------------------------------------------------------------------------------------------------------------

    AVERTISSMENT - DANGER

    Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

  • 1.38 inch Double Plastic Plunger 1

    Features/Applications
    The following NEMA 12/13, IP65 switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and long term reliability of these switches makes them extremely well suited to function within various industrial / commercial environments.

    Electrical Ratings
    "HEAVY DUTY - A600 / N300”
    Listed under UL 508 - File # E 58589
    Certified under CSA C22.2 - File # LR 3648
    CE Compliant IEC/EN 60947-5-1
     Certificate # D-01496-M1

    Environmental Temperature Range
    Operating: +32°F to +131°F (0°C to +55°C)
    Storage: -40°F to +185°F (-40°C to +85°C)
    Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


    Can be mounted in standard REES Standard enclosures.
    Plungers and contacts are not field replaceable.


    double plunger

    WARNING - DANGER

    These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

    ---------------------------------------------------------------------------------------------------------------------

    AVERTISSMENT - DANGER

    Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

  • Double Plastic Plunger with Padlock Latch 1

    Features/Applications
    The following NEMA 12/13, IP65 switches are hand operated, lockable, control circuit devices, rated ‘Heavy Duty normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500,000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and reliability of these switches makes them extremely well suited to function within various industrial / commercial environments. The padlock slide latches the red plunger in the depressed position.

    Electrical Ratings
    "HEAVY DUTY - A600 / N300”
    Listed under UL 508 - File # E 58589
    Certified under CSA C22.2 - File # LR 3648
    CE Compliant IEC/EN 60947-5-1
     - See individual parts for Certificate #

    Environmental Temperature Range
    Operating: +32°F to +131°F (0°C to +55°C)
    Storage: -40°F to +185°F (-40°C to +85°C)
    Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


    Can be mounted in standard REES Standard enclosures.
    Plungers and contacts are not field replaceable.

    double plunger

    WARNING - DANGER

    These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

    ---------------------------------------------------------------------------------------------------------------------

    AVERTISSMENT - DANGER

    Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

^