Features/Applications

The following inline “slack cable” style switch has 2 momentary NC contacts and 2 momentary NO contacts with Positive Break and Positive Transfer features. It also features automatic reset, making it particularly competent for ordinary circuit control in scenarios requiring constant starting and stopping.

The housing is made from high quality yellow nylon. There is no mounting necessary for this device.  This switch will hang in-line with the cable run.

• 40lb Trip Force
• Gold plated contacts eliminate high resistance tarnishing
• Nema Type 4 Indoor Only, IP 65
• UL Listed (File E58589); C-UL-US

The switch comes pre-wired for quick and easy installation and utilizes an 8 pin M12 connector.  The maximum cable recommended cable length is 200 feet in each direction with a maximum interval support of 10 feet.

The mechanical life of the switch is 100,000 operations.

Typically found on process applications such as conveyors, transfer machines or assembly lines.

The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments.

There are many configurations available for the 04963-XXX series switches. Please contact us for more information if you do not see a fit for your application.

Electrical Ratings

30V, 2A Max.

UL Listed (File E58589); NKCR (E58589); C-UL-US;

Switches comply with UL-508; CSA-C 22.2 No. 14; EN 60947-5-1:2017

Environmental Temperature Range

Operating:  +32^oF to +131^oF (0^oC to +55^oC)

Storage:  -40^oF to +185^oF (-40^oC to +85^oC)

Note:  Operating temperatures at 0^oC are based on the absence of freezing moisture and liquids.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.