Features/Applications

The following “slack cable” style switch has 2 NO and 2 NC contacts.   This switch is particularly competent   for use in Emergency Stop applications as well as for ordinary circuit control.

The housing is made from high quality die-cast aluminum and painted with a white powder coating that has no residual heavy metals and contains no lead or reactive materials that may be considered unsafe in food. 

·        Manual  Reset with “Positive Break” contacts

·        Gold plated contacts eliminate high resistance tarnishing

·        Nema 4X (indoor), IP 66

·        May be mounted for right or left hand pull

Each captive terminal will accept (2) #14 AWG stranded wires.  Each switch is supplied with a santoprene gasket, which provides an oil tight seal upon installation and protects against corrosive environments.

There are two 1/2” NPT conduit openings.  The maximum cable recommended cable length is 200 feet with a maximum interval support of 10 feet.

The mechanical life of the switch is 150,000 operations.

This switch can be installed on various conveyor installations, particularly those requiring constant starting and stopping operations.

The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments, including food processing areas, without direct contact to

the product.

Electrical Ratings

“HEAVY DUTY – A600 / N300”

CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range

Operating:  +32^oF to +131^oF (0^oC to +55^oC)

Storage:  -40^oF to +185^oF (-40^oC to +85^oC)

Note:  Operating temperatures at 0^oC are based on the absence of freezing moisture and liquids.

^a  Power factor 0.35 or less

^b  Inductive loads as specified in Section 125 of Industrial

   Control Devices, Controllers and Assemblies, ANSI /

   NEMA ICS 2-1988

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.