Search:GO
USA
Made in the USA
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Cable/Rope Operated Switches > Cable Operated Switches with Single Flag Indicators or Latch Plates > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Cable Operated Switches with Single Flag Indicators or Latch Plates

 
Check up to five results to perform an action.

Features/Applications
The following switches are a “slack cable” style with ‘Slow-Make’ and ‘Positive Break’ contacts.These switches can be used for Emergency Stop applications as well as for ordinary circuit control. The housing is made from high quality die-cast aluminum and painted with a yellow dry powder paint. The independently operating red indicating flag rotates 90 degrees when tripped. Manually returning the flag to its normal position resets the switch. Switch enclosures are provided with two 1/2" NPT conduit openings. The maximum recommended cable length is 200 feet with a maximum interval support of 10 feet. The mechanical life of these devices is 150,000 operations. Each captive terminal on the replaceable contact block will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. These devices can be found on various conveyor installations. Their rugged construction and long term reliability make these cable switches extremely well suited to function within various industrial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N150”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.
These switches come with a santoprene 101-80 cover gasket. 

Contact blocks and flags are field replaceable

single flag

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.



Compare Items Add To Cart Request Quote
   
  Results 1 - 12 of 12 1 

Item #

Item Photo

Trip Force per End

Flag End Replaceable

Operating Force Between 10 ft. Supports

Reset Type

Contact Arrangement
04953-111 25 lb Right 6 lb Manual NO + NC
04953-112 25 lb Right 6 lb Manual 2 NO + 2 NC
04953-113 N/A 25 lb Right 6 lb Manual NO + NO
04953-114 N/A 25 lb Right 6 lb Manual NC + NC
04953-121 25 lb Left 6 lb Manual NO + NC
04953-122 25 lb Left 6 lb Manual 2 NO + 2 NC
04953-123 N/A 25 lb Left 6 lb Manual NO + NO
04953-124 N/A 25 lb Left 6 lb Manual NC + NC
04953-132 25 lb Latch Plate
Right 		6 lb Manual 2 NO + 2 NC
(make - before - break)
04953-142 25 lb Latch Plate
Left 		6 lb Manual 2 NO + 2 NC
(make - before - break)
04953-432 N/A 25 lb Right 6 lb Manual 2 NO + 2 NC
(make - before - break)
04953-442 N/A 25 lb Left 6 lb Manual 2 NO + 2 NC
(make - before - break)
  Results 1 - 12 of 12 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 years