Search:GO
USA
Made in the USA

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Cable/Rope Operated Switches > Accessory Items for Cable/Rope Switches > Standard Pilot Lights > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Standard Pilot Lights

Check up to five results to perform an action.

Features/Applications
The pilot light bodies are made from polycarbonate and are sonically welded together. The chrome plated zinc die cast housings will mount in a standard 30.5mm hole. They are environmentally rated NEMA 12/13. Each captive terminal on the terminal block will accept (2) # 14 AWG stranded wires. These lights are generally found on machine control panels as circuit/function indicators. The NPT mount styles compliment the self contained cable switches and are used extensively in that function. Replacement lamps and lenses can be found in the accessories section for 30.5mm devices.
NOTE: Except where noted Lenses are NOT included with the pilot lights.

Electrical Ratings
Listed under UL 508 - File # E 58589;
Certified under CSA C22.2 - File # LR 3648

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.





Compare Items Add To Cart Request Quote
   
  Results 1 - 15 of 15 1 

Item #

Item Photo

Input Voltage

Lamp Type/No.

Lamp Design Volts

Lamp Design Amps

Type / Style

Mounting Hole

40200-000 120VAC@60Hz 60MB 60 50 mA Solid State Flasher, (~ 1 / sec.) 1.21 in. (30.5mm) dia.
40440-000 120VAC@60Hz 755 6.3 150 mA Transformer, press-to-test 1.21 in. (30.5mm) dia.
40460-000 N/A 120 volts TSL 130V, 2.4W 120 25 mA Full Voltage, non-press-to-test 1.21 in. (30.5mm) dia.
40460-080 N/A 12 volts 1815 14 200 mA Full Voltage, non-press-to-test 1.21 in. (30.5mm) dia.
40460-090 24 volts 1819 28 40 mA Full Voltage, non-press-to-test 1.21 in. (30.5mm) dia.
40460-480 N/A 120 volts B2A 120 1.2 mA Full Voltage Neon, non-press-to-test 1.21 in. (30.5mm) dia.
40700-000 N/A 120V@60Hz 755 6 150 mA Remote-press-to-test 1.21 in. (30.5mm) dia.
40700-085 N/A 120V@60Hz 755 6 150 mA Dual Input Voltage 1.21 in. (30.5mm) dia.
40100-000 (None) (None) N/A (None) mA Lexan housing only 1/2 in. NPT
40100-002 120 volts TSL 130V, 2.4W 120 25 mA Full Voltage, non-press-to-test 1/2 in. NPT
40100-012 120 volts LED Bulb Bi-Polar 120 9.5 mA Full Voltage, non-press-to-test 1/2 in. NPT
40100-112 24 volts LED Bulb Bi-Polar 24 30 mA Full Voltage, non-press-to-test 1/2 in. NPT
40100-102 24 volts #1819 24 40 mA Full Voltage, non-press-to-test 1/2 in. NPT
40500-000 120V@60Hz 755 6 150 mA Transformer, non-press-to-test 1/2 in. NPT
40500-002 120V@60Hz 755 6 150 mA Transformer, non-press-to-test 1/2 in. NPT
  Results 1 - 15 of 15 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 

years