Features/Applications
The following inline “taut cable” style switch has 2 NC contacts with Positive Break and Positive Transfer features making it particularly competent for use in Emergency Stop applications as well as for ordinary circuit control. 

The housing is made from high quality yellow nylon.  Set-up position is easily attained by using the color coded cable status indicator.  Cable is stretched tightly until the green band is aligned with hub end.  Switch will trip and latch if the cable breaks, comes loose or is pulled.  Blue reset handle is pulled to reset contacts back to their normal operating configuration.  There is no mounting necessary for this device.  This switch will hang in-line with the cable run. A red LED pilot light comes installed and wired on this model.

• Designed to reduce “nuisance tripping” often associated with taut cable switches
• Gold plated contacts eliminate high resistance tarnishing
• Nema Type 4 Indoor Only, IP 65
• UL Listed (File E58589); NISD (E357870) C-UL-US                                                                    

The switch comes pre-wired for quick and easy installation and utilizes a 5 pin M12 connector.  The maximum cable recommended cable length is 200 feet in each direction with a maximum interval support of 10 feet.

The mechanical life of the switch is 100,000 operations.

Typically found on process applications such as conveyors, transfer machines or assembly lines within the automotive, machine tool, foundry and pharmaceutical industries this switch provides a constant access for emergency or normal stopping. 

The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments.

There are many configurations available for the 04963-XXX series switches. Please contact us for more information if you do not see a fit for your application.

Electrical Ratings
24V, 4A Max.
UL Listed (File E58589); NISD (E357870) C-UL-US;
Switches comply with UL-508; CSA-C 22.2 No. 14; EN 60947-5-1:2017;
EN 60947-5-5:1997+A2:2017

Environmental Temperature Range
Operating:  +32oF to +131oF (0oC to +55oC)
Storage:  -40oF to +185oF (-40oC to +85oC)
Note:  Operating temperatures at 0oC are based on the absence of freezing moisture and liquids.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.