Search:GO
USA
Made in the USA
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > 30.5 mm Control Units > Miniature Pilot Lights > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Miniature Pilot Lights

 
Check up to five results to perform an action.

Features/Applications
The pilot light bodies are made from polycarbonate and are sonically welded together. The zinc die cast housings will mount in a 0.69 in. dia. hole. They are environmentally rated NEMA 12/13. Each captive terminal on the terminal block will accept (2) # 14 AWG stranded wires. These lights are generally found on machine control panels as circuit / function indicators. Replacement lamps and lenses can be found in the accessories, section, on pages 56 and 59, for 30.5mm devices.
NOTE: Except where noted Lenses are NOT included with the pilot lights.

Electrical Ratings
Listed under UL 508 - File # E 58589;
Certified under CSA C22.2 - File # LR 3648

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.



Compare Items Add To Cart Request Quote
   
  Results 1 - 15 of 15 1 

Item #

Item Photo

Input Voltage

Lamp Type/No.

Lamp Design Volts

Lamp Design Amps

Type / Style
44200-000 120 volts at 60Hz 755 6.3 150 mA Transformer, press-to-test
44200-090 24 volts 755 6.3 150 mA Resistor Load, press-to-test
44300-000 120 volts 120MB 120 25 mA Full Voltage, press-to-test
44300-090 24 volts 1819 28 40 mA Full Voltage, press-to-test
44700-000 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test, resistor load
44700-090 24 v DC 755 6.3 150 mA Remote-press-to-test
44700-102 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Red Lens
44700-103 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Green Lens
44700-104 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Yellow Lens
44700-105 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Blue Lens
44700-106 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with White Lens
44700-107 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Amber Lens
44700-108 N/A 120 volts at 60Hz 755 6.3 150 mA Remote-press-to-test with Clear Lens
44800-000 120 volts at 60Hz 755 6.3 150 mA Memory Indicator, Xfmr, Remote Reset
44800-085 N/A 12v DC 1815 14 200 mA Memory Indicator, Remote reset
  Results 1 - 15 of 15 1 
Site created by ThomasNet Web Solutions
Rees, Inc. | A leader in the design of control switches for over 80 years