Call: 260.495.9811Email: sales@reesinc.com
TERMS AND CONDITIONS

NOTE: Express orders - if need shipped out today, order must be placed by the following times:

UPS: 11:00 A.M. Eastern Time
FedEx: 11:00 A.M. Eastern Time
*Express shipping may not be available for all items
Features/Applications
The pilot light bodies are made from polycarbonate and are sonically welded together. The zinc die cast housings will mount in a 0.69 in. dia. hole. They are environmentally rated NEMA 12/13. Each captive terminal on the terminal block will accept (2) # 14 AWG stranded wires. These lights are generally found on machine control panels as circuit / function indicators. Replacement lamps and lenses can be found in the accessories, section, on pages 56 and 59, for 30.5mm devices.
NOTE: Except where noted Lenses are NOT included with the pilot lights.

Electrical Ratings
Listed under UL 508 - File # E 58589;
Certified under CSA C22.2 - File # LR 3648

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 

Item #

Item Photo

Input Voltage

Lamp Type/No.

Lamp Design Volts

Lamp Design Amps

Type / Style

Add To Cart/Request Quote
Sort by

44300-000
N/A 120 volts N/A 120MB N/A 120 N/A 25 mA N/A Full Voltage, press-to-test Add To Cart
Request Quote

44200-000
N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Transformer, press-to-test Add To Cart
Request Quote

44700-000
N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test, resistor load Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Red Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Green Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Yellow Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Blue Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with White Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Amber Lens Add To Cart
Request Quote

N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test with Clear Lens Add To Cart
Request Quote

44800-000
N/A 120 volts at 60Hz N/A 755 N/A 6.3 N/A 150 mA N/A Memory Indicator, Xfmr, Remote Reset Add To Cart
Request Quote

N/A 12v DC N/A 1815 N/A 14 N/A 200 mA N/A Memory Indicator, Remote reset Add To Cart
Request Quote

44700-090
N/A 24 v DC N/A 755 N/A 6.3 N/A 150 mA N/A Remote-press-to-test Add To Cart
Request Quote

44200-090
N/A 24 volts N/A 755 N/A 6.3 N/A 150 mA N/A Resistor Load, press-to-test Add To Cart
Request Quote

44300-090
N/A 24 volts N/A 1819 N/A 28 N/A 40 mA N/A Full Voltage, press-to-test Add To Cart
Request Quote
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 
^