Print Back
Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plunger head is powder painted or chrome plated die-cast zinc. The plunger head of the 04662 is plastic. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with all mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations. These switches can be found on a variety of machines such as punch presses, press brakes, and spot-welding equipment as “RUN”, “START” or “STOP” buttons. They are also used on transfer machines. The 04662-002 complies with standards for ‘emergency stop’ applications. Their rugged construction and long term reliability make these switches extremely well suited to function within various industrial / commercial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


Plungers and contacts are not field replaceable.
Use legend plates series 09005.
Must order #04917-212 or #04917-712 if ring guard is required.
Ring guard for these switches cannot be added in the field.

Can be mounted in REES 04938 series.

single plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

Push Button Switches with Larger Mounting Pattern 1
Unit of Measure
1 

Item #

Item Photo

Plunger Color

Operating Force

Intergral Ring Guard

Positive Opening Contact

Contact Arrangements (All Momentary)

04662-002
04662-002
N/A 2.25" dia. Red Plastic N/A 5.0 lb N/A No
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
04917-102
04917-102
N/A 2.75" dia. Red Painted Die Cast N/A 3.5 lb N/A No
 
N/A #64 2 NO + 2 NC,
Snap-Action
04917-112
04917-112
N/A 2.75" dia. Chrome Plated Die Cast N/A 3.5 lb N/A No
 
N/A #64 2 NO + 2 NC,
Snap-Action
04917-212
04917-212
N/A 2.75" dia. Chrome Plated Die Cast N/A 3.5 lb N/A Yes
 
N/A #64 2 NO + 2 NC,
Snap-Action
04917-712
04917-712
N/A 2.75" dia. Chrome Plated Die Cast N/A 2.0 lb N/A Yes
 
N/A #64 2 NO + 2 NC,
Snap-Action
04917-812
04917-812
N/A 2.75" dia. Chrome Plated Die Cast N/A 2.0 lb N/A No
 
N/A #64 2 NO + 2 NC,
Snap-Action
Unit of Measure
1