Print Back
Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The cover, painted with a dry powder paint, and the chrome plated/painted plunger are made from die-cast zinc. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with all mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations.These switches can be found on a variety of machines such as punch presses, press brakes, and spot-welding equipment as “RUN” or “START” buttons. Their rugged construction and long term reliability make these switches extremely well suited to function within various environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


Can be mounted in standard REES enclosures.
Plungers and contacts are not field replaceable.

single plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

Flat Chrome Plunger Push Buttton Switches 1
Unit of Measure
1 

Item #

Item Photo

Plunger Color

Operating Force

Positive Opening Contact

Contact Arrangements (All Momentary)

02653-012
02653-012
N/A 2.25" dia. Chrome N/A 5.5 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make
02653-112
02653-112
N/A 2.25" dia. Chrome N/A 2.5 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make
03727-012
03727-012
N/A 2.25" dia. Chrome N/A 3.3 lb
 
N/A #10 NO + NO,
Slow-Make
04917-012
04917-012
N/A 2.25" dia. Chrome N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
04917-312
04917-312
N/A 2.75" dia. Chrome N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
04957-001
04957-001
N/A 2.75" dia. Black N/A 1.9 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
04957-003
04957-003
N/A 2.75" dia. Green N/A 1.9 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
04957-012
04957-012
N/A 2.75" dia. Chrome N/A 1.9 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
Unit of Measure
1