Print Back
Features/Applications
The following switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plunger heads are powder painted or chrome plated zinc die-cast. Styles 01307 and 02049 have an additional internal diaphragm for added protection. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid santoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations. These switches can be found on a variety of machines such as punch presses, press brakes and spot-welding equipment as “RUN”, “START” or “STOP” buttons. The “Positive Break” styles comply with all standards for ‘emergency stop’ applications. The rugged construction and long term reliability make these switches extremely well suited to function within various industrial / commercial environments.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.


Can be mounted in standard REES Standard enclosures.
Plungers and contacts are not field replaceable.

single plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

2.25 inch Metal Mushroom Plunger 1
Unit of Measure
1 

Item #

Item Photo

Plunger Color

Operating Force

Positive Opening Contact

Contact Arrangements (All Momentary)

01307-012
01307-012
N/A Chrome N/A 9.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
01371-012
01371-012
N/A Chrome N/A 5.2 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
01371-112
01371-112
N/A Chrome N/A 5.2 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
01508-012
01508-012
N/A Chrome N/A 2.5 lb
 
N/A #10 NO + NO,
Slow-Make
02049-001
02049-001
N/A Black N/A 10.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02049-002
02049-002
N/A Red N/A 10.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02761-001
02761-001
N/A Black N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
02761-002
02761-002
N/A Red N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
02761-003
02761-003
N/A Green N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
02761-004
02761-004
N/A Yellow N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
02911-001
02911-001
N/A Black N/A 5.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02911-002
02911-002
N/A Red N/A 8.5 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02911-004
02911-004
N/A Yellow N/A 5.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02911-102
02911-102
N/A Red N/A 5.0 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
02912-001
N/A Black N/A 4.0 lb
 
N/A #10 NO + NO,
Slow-Make
02919-012
02919-012
N/A Chrome N/A 3.7 lb
 
N/A #64 2 NO + 2 NC,
Snap-Action
Unit of Measure
1