Call: 260.495.9811Email: sales@reesinc.com
Features/Applications
The following NEMA 12/13, IP65 switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plastic plunger heads are solid colors throughout. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1,000,000 operations. These switches can be found on a variety of machines in all types of applications. Their rugged construction and long term reliability make these switches extremely well suited to function within various industrial or commercial environments.
1.00 inch Plastic Plunger
The 00294’s have a slightly extended plunger while the 02221’s are flush type models. The small plunger diameter requires activation by either finger or thumb reducing the possibility of accidental tripping.

Electrical Ratings
"HEAVY DUTY - A600 / N300”
Listed under UL 508 - File # E 58589
Certified under CSA C22.2 - File # LR 3648
CE Compliant IEC/EN 60947-5-1
Third party certified under DEMKO Certificate # D-01496-M1

Environmental Temperature Range
Operating: +32°F to +131°F (0°C to +55°C)
Storage: -40°F to +185°F (-40°C to +85°C)
Note: Operating temperatures at 0°C are based on the absence of freezing moisture and liquids.

single plunger

WARNING - DANGER

These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met.  Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

---------------------------------------------------------------------------------------------------------------------

AVERTISSMENT - DANGER

Ces produit doivent seulement être utilisés sur des postes à risque correctement sécurisés et entretenus afin d’être conforme aux standards et régulations en vigueur (CSA, CLC). Un mauvais usage de ces produits sur des machines et des postes de travail non sécurisés de manière efficace peut causer des blessures graves au technicien maniant ces machines.

1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Item Photo

Plunger Color

Operating Force

Positive Opening Contact

Contact Arrangement

Add To Cart/Request Quote
00294-001
00294-001
N/A Black N/A 4.3 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
00294-002
00294-002
N/A Red N/A 4.8 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
00294-003
00294-003
N/A Green N/A 4.3 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
00294-004
00294-004
N/A Yellow N/A 4.4 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
02221-001
N/A Black N/A 4.5 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
02221-002
02221-002
N/A Red N/A 4.8 lb
 
N/A #09 NO + NC
Positive Break,
Slow-Make/Slow-Break
Add To Cart
Request Quote
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
^